Brass Solids

 

"SHERA" offers various grades of brasses as per national, international and customer made specification and above this we can exceed in standard with reference to end application. Most commonly used brasses are given below with equivalent specification, chemical composition, physical properties and size range offered by SHERA. Brasses has excellent properties like strength, malleability, ductility, wear resistance, hardness, bright golden surface, anti-microbial, thermal and electrical conductivity, excellent forgability and formability, this makes brass the cheapest and most viable material to be used for wide range of applications. Also brasses are indispensable when long term cost effective service life is required.

  1. FREE CUTTING BRASS
  2. FORGING BRASS
  3. HIGH TENSILE BRASS
  4. NAVAL BRASS
  5. MANAGANESE BRONZE
  6. CARTIGE BRASS
  7. YELLOW BRASS

  • Bus BarBus Bar
  • Round BarRound Bar
  • SectionsSections
  • Brass WireBrass Wire
  • Bus BarBus Bar
  • Rod and Hex BarRod and Hex Bar

Our products have various applications

Some of these are:

  • Ball Pen TipBall Pen Tip
  • Brass for Lock IndBrass for Lock Ind
  • Brass ValveBrass Valve
  • Defense CartridgeDefense Cartridge
  • Chlorine Cylinder ValveChlorine Cylinder Valve
  • LPG ValveLPG Valve
  • Naval Brass Tube PlateNaval Brass Tube Plate
  • Tire Tube ValveTire Tube Valve

Alloyed Products

Chemical & Physical Properties of Brass Solid

   
SPECIFICATIONS
%CHEMICAL COMPOSITION
PHYSICAL PROPERTIES
S.N BRASSES IS ASTM BSEN JIS Cu Pb Fe Sn Mn Zn *Tensile Strength N/mm2 *% Elongation *Hardness, VPN
1. FREE CUTTING BRASS IS:319 GR-1& 2  C 36000/ C 38500  CW 614  C 3601-4 57 to 61 2.5 to 3.5 0.3 Max 0.3 Max -

 

Balance

350-600 5-25 75-125
2. FORGING BRASS IS:6912, IS:8737 C 37700  CW 617N  C 3771 57 to 61 1to 2.5 0.3 Max - 1.0   15-25 90-125
3. HIGH TENSILE BRASS IS:6912 FHTB-1 C 67500 CW 722 C 6782 56.5 to 58.5 0.80 to 1.6 0.2 to 1.2 0.2 to 1.0 0.8 to 1.8   10-20 100-175
4. NAVAL BRASS IS:6912, FNB C 46400 CW 714R C 4622/C 4641 59 to 62 0.20 Max 0.1 Max 0.5 to 1.0 - 20-30 80-125
5.

MANAGANESE BRONZE

IS:6912, FHTB-3 C 67500 CW 723R C 6783 56.5 to 58.5 0.50 Max 0.5 to 1.5 0.3 Max 1.0 to 2.0 10-20 100-175
6. CARTIGE BRASS IS: 407 ALLOY-1 C 26000 CW 505 C 2600 68.5 to 71.5 0.07 Max 0.05 Max - - 15-30 90-110
7. YELLOW BRASS IS: 407 ALLOY-2 C 27400 CW508 C 2800 61to 64 0.1 0.05 0. 05 -

Size Range of Brass Solid

   
ROUND
HEX AND SQUARE
RECTANGULAR
S.N ALLOY CAST AND MACHINED EXTRUDED AND DRAWN AS EXTRUDED EXTRUDED AND DRAWN AS EXTRUDED EXTRUDED AND DRAWN AS EXTRUDED
1. FREE CUTTING BRASS, FORGING BRASS,
HIGH TENSILE BRASS, NAVAL BRASS, MANAGANESE BRONZE
50 mm to 200m 2 mm to 80 mm >80 mm to 130 mm 15 mm to 80 mm >80 mm to 100mm

4 mm Min THICKNESS X 70 mm Max WIDTH

10 mm Min THICKNESS X 125 mm Max WIDTH

2. CARTIGE AND
YELLOW BRASS

8mm to

200mm

2 to 25 mm cast & drawn and above this upto 80mm extruded & drawn 80 mm to 100 mm 3 to 25 mm  cast & drawn and above this upto 80 mm extruded & drawn 80 mm to 100 mm

    * - Depend upon the temper - annealed, half hard or full hard.